Introduzione

A guide on how to replace a damaged DC power board on a Samsung BD-7500.

Parti

Nessuna parte richiesta.

  1. Remove the three 10mm screws with a Phillips #0 screwdriver.
    • Remove the three 10mm screws with a Phillips #0 screwdriver.

    • Pry the top off with a plastic opening tool.

    Aggiungi Commento

  2. Remove the three screws holding down the cover with a Phillips #0 screwdriver.
    • Remove the three screws holding down the cover with a Phillips #0 screwdriver.

    Aggiungi Commento

    • Lift up the power cord at its base to remove it.

    Aggiungi Commento

    • Insert a plastic opening tool into the black plastic tab on the cord and twist to separate.

    Aggiungi Commento

    • Remove the 7mm screw with a Phillips #1 screwdriver.

    • Grip the blue tab attached to the base and pull upwards.

    Aggiungi Commento

    • Grip the edges of the motherboard and pull upwards to remove.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

samer odeh

Membro da: 13/02/2018

313 Reputazione

1 Guida realizzata

Team

USF Tampa, Team S16-G4, Boczar Spring 2018 Membro di USF Tampa, Team S16-G4, Boczar Spring 2018

USFT-BOCZAR-S18S16G4

4 Membri

4 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 4

Tutti i Tempi: 48