Salta al contenuto principale

Samsung BD-E5400 Wi-Fi Card Replacement

Cosa ti serve

  1. Samsung BD-E5400 Wi-Fi Card Replacement, Outer Cover: passo 1, immagine 1 di 2 Samsung BD-E5400 Wi-Fi Card Replacement, Outer Cover: passo 1, immagine 2 di 2
    • Remove the two 10mm Phillips #1 screws.

    • Remove the one 8 mm Phillips #1 screw.

    • Carefully lift up the cover and lay back, to ensure that you do not damage the attached cable.

  2. Samsung BD-E5400 Wi-Fi Card Replacement: passo 2, immagine 1 di 1
    • Unplug the small wiring bundle attaching the body of the device to the cover.

    • Lay the cover aside.

  3. Samsung BD-E5400 Wi-Fi Card Replacement, WIFI Card: passo 3, immagine 1 di 3 Samsung BD-E5400 Wi-Fi Card Replacement, WIFI Card: passo 3, immagine 2 di 3 Samsung BD-E5400 Wi-Fi Card Replacement, WIFI Card: passo 3, immagine 3 di 3
    • The Wi-Fi card is the light blue component circled in red.

    • Separate the body of the Wi-Fi card from the black plastic cover.

    • Unplug the wires of the Wi-Fi card from the motherboard.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

IUPUI, Team S1-G3, Arle Fall 2018 Membro di IUPUI, Team S1-G3, Arle Fall 2018

IUPUI-ARLE-F18S1G3

3 Membri

4 Guide realizzate

Un commento

I replaced my wifi card now none of the apps are working. I tried factory reset, and updating firmware nothing. Any ideas to get past this?

mike monroe - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 273