Salta al contenuto principale
  1. push down the back cover of the phone, then take it out.
    • push down the back cover of the phone, then take it out.

  2. Remove the battery.
    • Remove the battery.

  3. Remove the two (4.1 mm) screws down the screen.
    • Remove the two (4.1 mm) screws down the screen.

  4. Batterie per PC portatili

    Batterie per tutti i migliori marchi di PC, supportate dalla nostra Garanzia di Qualità.

    Acquista ora

    Batterie per PC portatili

    Batterie per tutti i migliori marchi di PC, supportate dalla nostra Garanzia di Qualità.

    Acquista ora
  5. Remove the upper casing with a plastic opening tools. Remove the upper casing with a plastic opening tools.
    • Remove the upper casing with a plastic opening tools.

  6. Use soldering iron to melt, and remove soldering joints of the speaker.
    • Use soldering iron to melt, and remove soldering joints of the speaker.

  7. Use tweezers to remove the speaker from its place. Note: There are two speakers. Make sure you know which one is broken before removing it.
    • Use tweezers to remove the speaker from its place.

    • Note: There are two speakers. Make sure you know which one is broken before removing it.

  8. Use tweezers to insert the new speaker into the speaker slot. Use tweezers to insert the new speaker into the speaker slot.
    • Use tweezers to insert the new speaker into the speaker slot.

  9. Solder a speaker ribbon to the logic board.
    • Solder a speaker ribbon to the logic board.

    • Note: be careful to match the right polarity before you solder.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Chris

Membro da: 16/04/2011

133 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 12-35, Maness Spring 2011 Membro di Cal Poly, Team 12-35, Maness Spring 2011

CPSU-MANESS-S11S12G35

4 Membri

10 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 1,955