Aggiusta la tua roba Comunità Store

SONY ZS-BTG900 Remote Motherboard Replacement

Introduzione

Remotes can wear out easily, specifically the contacts between the silicon button pad and the circuit board.

To fix this, and extend the life of your device's remote, this guide will show you how to replace the circuit board.

Cosa ti serve

  1. SONY ZS-BTG900 Remote Motherboard Replacement, Remote Motherboard: passo 1, immagine 1 di 2 SONY ZS-BTG900 Remote Motherboard Replacement, Remote Motherboard: passo 1, immagine 2 di 2

    • Flip the remote and remove the backing.

    Traduci

  2. SONY ZS-BTG900 Remote Motherboard Replacement: passo 2, immagine 1 di 2 SONY ZS-BTG900 Remote Motherboard Replacement: passo 2, immagine 2 di 2

    • Locate the screw behind the battery pack.

    • Use a Phillips size 1 screwdriver to remove the 5/16in screw located inside the battery port.

    Traduci

  4. SONY ZS-BTG900 Remote Motherboard Replacement: passo 3, immagine 1 di 2 SONY ZS-BTG900 Remote Motherboard Replacement: passo 3, immagine 2 di 2

    • Use the plastic opening tool along the seam on the side of the remote until you hear a click. This means that the plastic tabs holding the remote together are coming loose.

    • Do this until the top half of the remote comes loose.

    Traduci

  5. SONY ZS-BTG900 Remote Motherboard Replacement: passo 4, immagine 1 di 2 SONY ZS-BTG900 Remote Motherboard Replacement: passo 4, immagine 2 di 2

    • Carefully remove the top to reveal the button covers and the remote control board.

    Traduci

  6. SONY ZS-BTG900 Remote Motherboard Replacement: passo 5, immagine 1 di 2 SONY ZS-BTG900 Remote Motherboard Replacement: passo 5, immagine 2 di 2

    • Lift the chip out of the plastic casing to replace it.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 10

Tutti i Tempi: 428