Aggiusta la tua roba Comunità Store

Ryobi RJ1861V Motor Housing Replacement

Cosa ti serve

  1. Ryobi RJ1861V Motor Housing Replacement, Trigger Assembly: passo 1, immagine 1 di 1

    • Use a Torx T20 screwdriver to remove the nine 16.5 mm screws around the trigger assembly.

    Modifica

  2. Ryobi RJ1861V Motor Housing Replacement: passo 2, immagine 1 di 2 Ryobi RJ1861V Motor Housing Replacement: passo 2, immagine 2 di 2

    • Use a Torx T20 screwdriver to remove the two 16.5 mm screws near the trigger.

    Modifica

  4. Ryobi RJ1861V Motor Housing Replacement, Motor Housing: passo 3, immagine 1 di 1

    • Use a Torx T20 bit or screwdriver to remove the six 19 mm screws securing the gear case cover.

    Modifica

  5. Ryobi RJ1861V Motor Housing Replacement: passo 4, immagine 1 di 2 Ryobi RJ1861V Motor Housing Replacement: passo 4, immagine 2 di 2

    • Use a Phillips #2 bit or screwdriver to remove the four 37 mm screws from the top and the bottom of the gear case.

    • Once these 4 screws are removed, you have access to the motor assembly.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 5

Tutti i Tempi: 116