Aggiusta la tua roba Comunità Store

Ryobi P277 Magnetic Tray Replacement

Introduzione

This guide will instruct the user on removing the magnetic tray from the Ryobi P277 cordless drill.

Cosa ti serve

  1. Ryobi P277 Magnetic Tray Replacement, Magnetic Tray: passo 1, immagine 1 di 2 Ryobi P277 Magnetic Tray Replacement, Magnetic Tray: passo 1, immagine 2 di 2

    • Lay the device on its side.

    • Remove eight 5 mm screws using a TR10 Torx screwdriver.

    • Separate the two halves by pulling up on the top half.

    • The two halves are still attached, so use caution when opening the device.

    Modifica

  3. Ryobi P277 Magnetic Tray Replacement: passo 2, immagine 1 di 1

    • Remove the magnetic tray from the device.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 72