Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Introduzione

Some people may be intimidated to try to handle the weed wacker line initially, but after reading the guide you will see that it is completely safe and easy even for people without any experience repairing anything at all! Follow this guide if you need to replace the line on your 18v model P2006A Ryobi weed whacker.

  1. Press the button and pull to remove the battery. Press the button and pull to remove the battery.
    • Press the button and pull to remove the battery.

  2. Press the button and pull to remove the line cover. Press the button and pull to remove the line cover.
    • Press the button and pull to remove the line cover.

  3. Take out the empty reel. A non-empty reel is shown in the picture.
    • Take out the empty reel.

    • A non-empty reel is shown in the picture.

  4. Untie and loosen the cord on the new reel. Untie and loosen the cord on the new reel.
    • Untie and loosen the cord on the new reel.

  5. Thread the replacement reel line into the hole and push the replacement reel in. Thread the replacement reel line into the hole and push the replacement reel in.
    • Thread the replacement reel line into the hole and push the replacement reel in.

  6. Put the cover back on.
    • Put the cover back on.

  7. Push the lever to allow yourself to pull 3-4 inches of line out.
    • Push the lever to allow yourself to pull 3-4 inches of line out.

  8. Put the battery back in. Put the battery back in.
    • Put the battery back in.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Michael Hockman

Membro da: 23/07/2020

157 Reputazione

1 Guida realizzata

Team

UW Tacoma, Team S1-G5, Cardinal Summer 2020 Membro di UW Tacoma, Team S1-G5, Cardinal Summer 2020

UWT-CARDINAL-SU20S1G5

1 Membro

1 Guida realizzata

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 25

Tutti i Tempi: 32