Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Rotary Multi Selector Wheel Removal

Introduzione

This guide is for the removal or installation of the rotary multi selector wheel.

Cosa ti serve

  1. Rotary Multi Selector Wheel Removal, Back Cover Removal: passo 1, immagine 1 di 3 Rotary Multi Selector Wheel Removal, Back Cover Removal: passo 1, immagine 2 di 3 Rotary Multi Selector Wheel Removal, Back Cover Removal: passo 1, immagine 3 di 3

    • Unscrew the two 3.5mm Phillips screws from the side with the AV outlet.

    • Unscrew the 3.5mm Phillips screw from the opposite side of the camera.

    • Unscrew the six 3.5mm Phillips screws from the bottom of the camera.

    Traduci

  2. Rotary Multi Selector Wheel Removal: passo 2, immagine 1 di 1

    • Carefully remove the back casing from the camera.

    • Be mindful when removing the back casing as there is a ribbon that still connects the back casing to the motherboard.

    Traduci

  4. Rotary Multi Selector Wheel Removal, Detaching Ribbon: passo 3, immagine 1 di 2 Rotary Multi Selector Wheel Removal, Detaching Ribbon: passo 3, immagine 2 di 2

    • Place the plastic opening tool underneath the ribbon tab as shown. Gently lift the tab up.

    • Gently pull the ribbon from the logic board with tweezers.

    • With the ribbon disconnected, the back casing should now be detached from the rest of the camera.

    Traduci

  5. Rotary Multi Selector Wheel Removal, Rotary Multi Selector Wheel: passo 4, immagine 1 di 3 Rotary Multi Selector Wheel Removal, Rotary Multi Selector Wheel: passo 4, immagine 2 di 3 Rotary Multi Selector Wheel Removal, Rotary Multi Selector Wheel: passo 4, immagine 3 di 3

    • Lift up the metal cover and its button slowly using the tweezers.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 5 altri collaboratori

Andrew Lau

Membro da: 04/18/13

1 Reputazione

1 Guida realizzata

Distintivi: 3

Team

Cal Poly, Team 8-56, Johann Spring 2013 Membro di Cal Poly, Team 8-56, Johann Spring 2013

CPSU-JOHANN-S13S8G56

4 Membri

18 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 4

Tutti i Tempi: 500