Aggiusta la tua roba Comunità Store

Rosewill NEON M62 Bottom Panel Replacement

Introduzione

This guide explains how to completely teardown the Rosewill NEON M62 mouse. This repair should be performed when something needs to be replaced internally.

Cosa ti serve

  1. Rosewill NEON M62 Bottom Panel Replacement, Bottom Panel: passo 1, immagine 1 di 1

    • Place the mouse so the bottom is facing upwards.

    • Remove the plastic skates.

    • These are not shown in the picture since they were missing from the device.

    • Remove the two 5 mm screws with a Phillips #00 screwdriver.

    Modifica

  3. Rosewill NEON M62 Bottom Panel Replacement: passo 2, immagine 1 di 1

    • Use the opening tool along the side of the mouse to open up it.

    • This may take multiple attempts to do so; be patient and careful not to break the mouse.

    Modifica

  4. Rosewill NEON M62 Bottom Panel Replacement: passo 3, immagine 1 di 2 Rosewill NEON M62 Bottom Panel Replacement: passo 3, immagine 2 di 2

    • Loosen the top and bottom half of the mouse with the opening tool, and slowly pull up the bottom half of the mouse.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 3 altri collaboratori

Joshua Alves

Membro da: 03/16/23

97 Reputazione

1 Guida realizzata

Distintivi: 5

+2 altri distintivi

Team

UMass Dartmouth, Team 7-2, Ryckebusch Spring 2023 Membro di UMass Dartmouth, Team 7-2, Ryckebusch Spring 2023

UMASSD-RYCKEBUSCH-S23S7G2

3 Membri

7 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 4

Tutti i Tempi: 103