Introduzione

In this guide, you will learn how to take apart the Ring Video Doorbell Pro.

Start by using the star-shaped end of the included Ring screwdriver to take out the 5 mm screw on the bottom of the device.
  • Start by using the star-shaped end of the included Ring screwdriver to take out the 5 mm screw on the bottom of the device.

Aggiungi Commento

Use your thumbs to apply downward pressure on the glass part of the device while pulling the faceplate up and off of the device.
  • Use your thumbs to apply downward pressure on the glass part of the device while pulling the faceplate up and off of the device.

Aggiungi Commento

  • Using a PH-000 screwdriver, unscrew and set aside all four of these 5.25 mm screws.

Aggiungi Commento

  • Using a plastic pry tool, go along the edge of the device prying the device apart. While doing this, focus on the four clips, two of which are on either side of the device.

Aggiungi Commento

  • Remove the front of the device from the back plate.

Aggiungi Commento

Conclusione

To reassemble your device, attach the new housing and follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Jake Dixon

Membro da: 09/11/2017

572 Reputazione

4 Guide realizzate

Team

IUPUI, Team S7-G4, Baechle Fall 2017 Membro di IUPUI, Team S7-G4, Baechle Fall 2017

IUPUI-BAECHLE-F17S7G4

3 Membri

4 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 22

Ultimi 30 Giorni: 101

Tutti i Tempi: 847