Introduzione

In this guide, you will be shown how to take apart the housing unit in order to replace the battery of the Ring Video Doorbell, step-by-step. You will need only a Plastic Tool Opener for this.

Parti

Nessuna parte richiesta.

Start by using the PH00 Phillips Screwdriver to take out the 6 1 mm screw's on the bottom of the device.
  • Start by using the PH00 Phillips Screwdriver to take out the 6 1 mm screw's on the bottom of the device.

  • Pry open the aluminium plate using the Plastic Opening Tool(s).

  • Remove the 2 1. mm screws using the PH00 Phillips Screwdriver.

Aggiungi Commento

Pry open the back case as shown using the Plastic Opening Tool.
  • Pry open the back case as shown using the Plastic Opening Tool.

  • Disconnect the battery from motherboard by carefully pulling up on the connector.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Abdulrahman

Membro da: 20/02/2018

467 Reputazione

3 Guide realizzate

Team

USF Tampa, Team S11-G5, Cheng Spring 2018 Membro di USF Tampa, Team S11-G5, Cheng Spring 2018

USFT-CHENG-S18S11G5

3 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 10

Ultimi 30 Giorni: 36

Tutti i Tempi: 142