Aggiusta la tua roba Comunità Store

Ring Spotlight Cam Battery Lights Replacement

Introduzione

If you are having trouble with the motion-activated lights and you would like to replace them, follow the 4 steps that are provided. It will take approximately 15-35 minutes.

Cosa ti serve

  1. Ring Spotlight Cam Battery Lights Replacement, Lights: passo 1, immagine 1 di 1

    • Remove the top plastic pad by peeling it off with a metal spudger.

    Modifica

  3. Ring Spotlight Cam Battery Lights Replacement: passo 2, immagine 1 di 2 Ring Spotlight Cam Battery Lights Replacement: passo 2, immagine 2 di 2

    • Remove the 7 PH00 screws around the four corners with PH00 of the lid.

    Modifica

  4. Ring Spotlight Cam Battery Lights Replacement: passo 3, immagine 1 di 1

    • Use the metal spudger set to break the glue lining and the motion sensor will pop out.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 6 persone hanno completato questa guida.

2 Commenti

this showed nothing about replacing the light bulb

Martha “purplemarty” Ewell - Replica

This is not a complete how to. The directions stop in the middle and don't show the replacement of the LEDs. Also no parts link for the replacement LED strips

Matt Newman - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 26

Ultimi 30 Giorni: 95

Tutti i Tempi: 4,848