Aggiusta la tua roba Comunità Store

Ridgid R86008 Gearbox Replacement

Cosa ti serve

  1. Ridgid R86008 Gearbox Replacement, Gearbox: passo 1, immagine 1 di 1

    • Before you begin make sure battery is removed from drill.

    • Loosen the four 13mm T10 Torx screws from the back of the drill and remove cap.

    Traduci

  2. Ridgid R86008 Gearbox Replacement: passo 2, immagine 1 di 1

    • Remove the two 25mm T10 Torx screws from the front of the drill.

    Traduci

  4. Ridgid R86008 Gearbox Replacement: passo 3, immagine 1 di 1

    • Remove the remaining 13mm T10 Torx screws and pull apart drill case.

    Traduci

  5. Ridgid R86008 Gearbox Replacement: passo 4, immagine 1 di 1

    • Identify gearbox.

    Traduci

  6. Ridgid R86008 Gearbox Replacement: passo 5, immagine 1 di 3 Ridgid R86008 Gearbox Replacement: passo 5, immagine 2 di 3 Ridgid R86008 Gearbox Replacement: passo 5, immagine 3 di 3

    • Using a PH1 screwdriver, remove the four 13mm PH screws from the back of the gearbox.

    • It may be easier to unscrew the screws by separating the front end of the drill from the rest of the drill.

    Traduci

  7. Ridgid R86008 Gearbox Replacement: passo 6, immagine 1 di 1

    • Pull apart gearbox.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 564