Salta al contenuto principale

Ridgid R2611 Switch Bracket Replacement

Cosa ti serve

  1. Ridgid R2611 Switch Bracket Replacement, Switch Bracket: passo 1, immagine 1 di 1
    • Remove the seven 2.5 mm screws on the top of the sander using the Torx T15 screwdriver.

  2. Ridgid R2611 Switch Bracket Replacement: passo 2, immagine 1 di 1
    • Remove the top of the sander and put to the side.

  3. Ridgid R2611 Switch Bracket Replacement: passo 3, immagine 1 di 1
    • Use the screwdriver to unscrew the two #6-19 X 5/8 in screws holding down the outlet cord.

  4. Ridgid R2611 Switch Bracket Replacement: passo 4, immagine 1 di 1
    • Remove the cord from the handle.

  5. Ridgid R2611 Switch Bracket Replacement: passo 5, immagine 1 di 1
    • Remove the outer plastic piece holding down the white and black wires.

  6. Ridgid R2611 Switch Bracket Replacement: passo 6, immagine 1 di 1
    • Unplug the two connecting pieces that hold wires.

  7. Ridgid R2611 Switch Bracket Replacement: passo 7, immagine 1 di 1
    • Using the screwdrivers, unscrew the four #6-19 X 5/8 in screws on rectangular block.

  8. Ridgid R2611 Switch Bracket Replacement: passo 8, immagine 1 di 1
    • Remove the black and white wires by pulling out.

  9. Ridgid R2611 Switch Bracket Replacement: passo 9, immagine 1 di 1
    • Put the screwdriver in the holes to release remaining two wires.

  10. Ridgid R2611 Switch Bracket Replacement: passo 10, immagine 1 di 1
    • Remove the two remaining wires from switch, leaving the switch freed.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 4

Tutti i Tempi: 268