Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Introduzione

Disassembling the handle assembly will be necessary for any rewiring or switch replacement needs. Jammed switches or a damaged power cord will require these preliminary steps for repair.

  1. Using a Torx T20 screwdriver, unscrew  the five M5 x 16 mm screws. Using the T20 screwdriver, remove the M5 x 28 mm screw. Using the T20 screwdriver, remove the M5 x 28 mm screw.
    • Using a Torx T20 screwdriver, unscrew the five M5 x 16 mm screws.

    • Using the T20 screwdriver, remove the M5 x 28 mm screw.

  2. Using a Torx T10 screwdriver, remove the M3 x 10mm  screw.
    • Using a Torx T10 screwdriver, remove the M3 x 10mm screw.

  3. Gently pull off the right side handle. Gently pull off the right side handle.
    • Gently pull off the right side handle.

  4. Using a hex head screwdriver, remove the two 8-16 x 1/2in screws. Using a hex head screwdriver, remove the two 8-16 x 1/2in screws. Using a hex head screwdriver, remove the two 8-16 x 1/2in screws.
    • Using a hex head screwdriver, remove the two 8-16 x 1/2in screws.

  5. Gently pull away the bend relief.
    • Gently pull away the bend relief.

  6. Remove the one M4 x 14 mm screw using a Phillips screwdriver. Remove the one M4 x 14 mm screw using a Phillips screwdriver.
    • Remove the one M4 x 14 mm screw using a Phillips screwdriver.

  7. Gently lift away the switch and wires.
    • Gently lift away the switch and wires.

  8. Press down the handle lock button. Force-ably twist and pull away the left side handle assembly.
    • Press down the handle lock button.

    • Force-ably twist and pull away the left side handle assembly.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 4

Tutti i Tempi: 68