Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Ricoh YF-20 Super Button Mechanism Replacement

Cosa ti serve

  1. Ricoh YF-20 Super Button Mechanism Replacement, Front Cover: passo 1, immagine 1 di 2 Ricoh YF-20 Super Button Mechanism Replacement, Front Cover: passo 1, immagine 2 di 2
    • Unscrew the seven indicated screws from the left, right, bottom, and back sides of the camera.

  2. Ricoh YF-20 Super Button Mechanism Replacement: passo 2, immagine 1 di 3 Ricoh YF-20 Super Button Mechanism Replacement: passo 2, immagine 2 di 3 Ricoh YF-20 Super Button Mechanism Replacement: passo 2, immagine 3 di 3
    • Loosen the back cover from both the left and the right sides of the camera.

    • Remove back cover. The lid of the battery compartment may fall off because it is not attached to anything.

  3. Ricoh YF-20 Super Button Mechanism Replacement: passo 3, immagine 1 di 3 Ricoh YF-20 Super Button Mechanism Replacement: passo 3, immagine 2 di 3 Ricoh YF-20 Super Button Mechanism Replacement: passo 3, immagine 3 di 3
    • Open the film compartment.

    • Press your finger on top of the grey latch on the left side of the camera.

  4. Ricoh YF-20 Super Button Mechanism Replacement: passo 4, immagine 1 di 3 Ricoh YF-20 Super Button Mechanism Replacement: passo 4, immagine 2 di 3 Ricoh YF-20 Super Button Mechanism Replacement: passo 4, immagine 3 di 3
    • Removing the film compartment door is optional. However, it may aid maneuverability in future steps.

    • Use a thin object like a toothpick or a small screwdriver to push down on the metal pin holding the film compartment door in place.

    • Use your fingers to completely remove the metal pin.

    • Remove the film compartment door.

  5. Ricoh YF-20 Super Button Mechanism Replacement: passo 5, immagine 1 di 2 Ricoh YF-20 Super Button Mechanism Replacement: passo 5, immagine 2 di 2
    • Using a thin shaft screwdriver, unscrew the two indicated screws within the film compartment.

  6. Ricoh YF-20 Super Button Mechanism Replacement: passo 6, immagine 1 di 3 Ricoh YF-20 Super Button Mechanism Replacement: passo 6, immagine 2 di 3 Ricoh YF-20 Super Button Mechanism Replacement: passo 6, immagine 3 di 3
    • Loosen the front cover from the left and right sides of the camera.

    • Remove the front cover.

  7. Ricoh YF-20 Super Button Mechanism Replacement, Ricoh YF-20 Super Button Mechanism Replacement: passo 7, immagine 1 di 3 Ricoh YF-20 Super Button Mechanism Replacement, Ricoh YF-20 Super Button Mechanism Replacement: passo 7, immagine 2 di 3 Ricoh YF-20 Super Button Mechanism Replacement, Ricoh YF-20 Super Button Mechanism Replacement: passo 7, immagine 3 di 3
    • The button mechanism is only attached to the camera body itself. Set the front and back covers aside.

    • Remove the one screw that holds the front face plate brace in place.

    • Remove brace.

  8. Ricoh YF-20 Super Button Mechanism Replacement: passo 8, immagine 1 di 3 Ricoh YF-20 Super Button Mechanism Replacement: passo 8, immagine 2 di 3 Ricoh YF-20 Super Button Mechanism Replacement: passo 8, immagine 3 di 3
    • Unscrew the four screws keeping the front face plate in place.

    • The top left screw also holds a metal clip in place.

    • Remove metal clip.

  9. Ricoh YF-20 Super Button Mechanism Replacement: passo 9, immagine 1 di 3 Ricoh YF-20 Super Button Mechanism Replacement: passo 9, immagine 2 di 3 Ricoh YF-20 Super Button Mechanism Replacement: passo 9, immagine 3 di 3
    • After removing the metal clip in the previous step, the front face plate can be removed.

    • The front face plate is attached to the camera body by two small wires. Remove the plate carefully and do completely separate from camera body.

  10. Ricoh YF-20 Super Button Mechanism Replacement: passo 10, immagine 1 di 3 Ricoh YF-20 Super Button Mechanism Replacement: passo 10, immagine 2 di 3 Ricoh YF-20 Super Button Mechanism Replacement: passo 10, immagine 3 di 3
    • Unscrew the two screws that hold the button mechanism in place.

    • Press down on button mechanism to unlatch it from the camera body. When pressed down, the bottom of the mechanism should push outward.

  11. Ricoh YF-20 Super Button Mechanism Replacement: passo 11, immagine 1 di 3 Ricoh YF-20 Super Button Mechanism Replacement: passo 11, immagine 2 di 3 Ricoh YF-20 Super Button Mechanism Replacement: passo 11, immagine 3 di 3
    • Lift the button mechanism up carefully, removing the spring at the top of the mechanism from where it is attached to the camera body.

    • Remove the button mechanism.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Eric Dazet

Membro da: 04/10/12

352 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 6-21, Amido Spring 2012 Membro di Cal Poly, Team 6-21, Amido Spring 2012

CPSU-AMIDO-S12S6G21

4 Membri

18 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 5

Tutti i Tempi: 1,079