Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a Phillips #3 screwdriver, remove the single 25 mm Phillips head screw in the handle by turning it counterclockwise.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a medium flathead screwdriver or better yet iFixit plastic opening tools, gently pry apart the handle from the power cord.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
After pulling apart the housing, all internals will be free to remove.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
The fan/motor assembly is connected to the heating element assembly at two points need to be desoldered. After pulling the attached wires through the holes the fan/motor assembly will be free from the heating element assembly. Congratulations you have now completely removed the fan/motor assembly from this hair dryer!
-