Aggiusta la tua roba ComunitĂ  Store

Revlon One-Step Hair Dryer Brush Disassembly

Introduzione

Teardown of the Revlon Hair Dryer Brush.

Cosa ti serve

  1. Revlon One-Step Hair Dryer Brush Disassembly, Hair Dryer: passo 1, immagine 1 di 2 Revlon One-Step Hair Dryer Brush Disassembly, Hair Dryer: passo 1, immagine 2 di 2

    • Pull Pink Tabs

    Modifica

  2. Revlon One-Step Hair Dryer Brush Disassembly: passo 2, immagine 1 di 1

    • Remove the Two Phillips screws, one on each side.

    Modifica

  3. Revlon One-Step Hair Dryer Brush Disassembly: passo 3, immagine 1 di 1

    • Pull Hair Brush Portion

    Modifica

  5. Revlon One-Step Hair Dryer Brush Disassembly, Remove Air Filter & Power Indicator/Ring: passo 4, immagine 1 di 2 Revlon One-Step Hair Dryer Brush Disassembly, Remove Air Filter & Power Indicator/Ring: passo 4, immagine 2 di 2

    • Twist and pull the Air Filter to remove. It is held in place by two lugs and holes (Circled blue on photo). Quite difficult to remove but it will come if enough force is applied

    • Slide the Power Indicator/Ring.

    Modifica

  6. Revlon One-Step Hair Dryer Brush Disassembly, Remove Screws: passo 5, immagine 1 di 1

    • Remove the Two Phillips screws, one on each side.

    Modifica

  7. Revlon One-Step Hair Dryer Brush Disassembly, Remove the Power Cord: passo 6, immagine 1 di 1

    • Remove Power Cord

    Modifica

  8. Revlon One-Step Hair Dryer Brush Disassembly, Remove Final Screw: passo 7, immagine 1 di 1

    • Remove final Philip screw.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

2 Commenti

Couldn’t remove air filter

moudd9 - Replica

Does Revlon sell a replacement brush?

Ron H - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 23

Ultimi 7 Giorni: 151

Ultimi 30 Giorni: 214

Tutti i Tempi: 15,628