Aggiusta la tua roba Comunità Store

Respironics REMstar Plus M Series Power Supply Circuit board Replacement

Cosa ti serve

  1. Respironics REMstar Plus M Series Power Supply Circuit board Replacement, Power Supply Circuit board: passo 1, immagine 1 di 3 Respironics REMstar Plus M Series Power Supply Circuit board Replacement, Power Supply Circuit board: passo 1, immagine 2 di 3 Respironics REMstar Plus M Series Power Supply Circuit board Replacement, Power Supply Circuit board: passo 1, immagine 3 di 3

    • Place the device face down.

    • Use a T15 Torx screwdriver to remove the six screws in the base plate.

    • Lift the base plate off of the device.

    Modifica

  3. Respironics REMstar Plus M Series Power Supply Circuit board Replacement: passo 2, immagine 1 di 3 Respironics REMstar Plus M Series Power Supply Circuit board Replacement: passo 2, immagine 2 di 3 Respironics REMstar Plus M Series Power Supply Circuit board Replacement: passo 2, immagine 3 di 3

    • Flip the circuit board over to the right.

    • Gently pull the ribbon cable outward to disconnect it from the circuit board.

    Modifica

  4. Respironics REMstar Plus M Series Power Supply Circuit board Replacement: passo 3, immagine 1 di 2 Respironics REMstar Plus M Series Power Supply Circuit board Replacement: passo 3, immagine 2 di 2

    • Disconnect the red 3-wire plug at the top left of the board and the white 4-wire plug at the bottom left.

    • Remove the circuit board.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

2 Commenti

My unit stops working in the middle of the night, then beeps, & blue light flashes. Will replacing this board fix this, and where can I get one?

mert454 - Replica

Where to find a power supply circuit board for my Remstar plus m series which just blinks blue lights. dledes@shaw.ca

David Edes - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 9

Tutti i Tempi: 953