Aggiusta la tua roba Comunità Store

ResMed VPAP Auto 25 Blower Unit Replacement Replacement

Introduzione

The blower unit fails when the device becomes overused and outdated. It also fails as a result of dust clogging up the intake. Replacements extend for only a certain amount of time. Replacing the blower unit will save lots of money compared to buying a whole new unit. Eventually, a full unit replacement is necessary.

Cosa ti serve

  1. ResMed VPAP Auto 25 Blower Unit Replacement Replacement, Blower Unit: passo 1, immagine 1 di 3 ResMed VPAP Auto 25 Blower Unit Replacement Replacement, Blower Unit: passo 1, immagine 2 di 3 ResMed VPAP Auto 25 Blower Unit Replacement Replacement, Blower Unit: passo 1, immagine 3 di 3

    • Remove the four 26.7 mm T3 Torx screws from the bottom side of the ResMed VPAP Auto 25.

    Traduci

  2. ResMed VPAP Auto 25 Blower Unit Replacement Replacement: passo 2, immagine 1 di 3 ResMed VPAP Auto 25 Blower Unit Replacement Replacement: passo 2, immagine 2 di 3 ResMed VPAP Auto 25 Blower Unit Replacement Replacement: passo 2, immagine 3 di 3

    • Flip the device over.

    • Pry the outermost plastic cover off with the metal spudger until the cover is loose and able to be removed.

    Traduci

  4. ResMed VPAP Auto 25 Blower Unit Replacement Replacement: passo 3, immagine 1 di 2 ResMed VPAP Auto 25 Blower Unit Replacement Replacement: passo 3, immagine 2 di 2

    • Pull off the front cover to reveal the internal components.

    Traduci

  5. ResMed VPAP Auto 25 Blower Unit Replacement Replacement: passo 4, immagine 1 di 3 ResMed VPAP Auto 25 Blower Unit Replacement Replacement: passo 4, immagine 2 di 3 ResMed VPAP Auto 25 Blower Unit Replacement Replacement: passo 4, immagine 3 di 3

    • Loosen the motherboard from the rubber dowels holding it in place and unplug the screen components.

    Traduci

  6. ResMed VPAP Auto 25 Blower Unit Replacement Replacement: passo 5, immagine 1 di 3 ResMed VPAP Auto 25 Blower Unit Replacement Replacement: passo 5, immagine 2 di 3 ResMed VPAP Auto 25 Blower Unit Replacement Replacement: passo 5, immagine 3 di 3

    • Remove the three 26.7 mm T3 Torx screws from the now visible rubber fan motor cover.

    • Lift off the rubber fan motor cover, revealing the fan motor.

    Traduci

  7. ResMed VPAP Auto 25 Blower Unit Replacement Replacement: passo 6, immagine 1 di 1

    • Unplug the blower unit cable.

    • Remove the fan motor blower unit.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Un commento

where can we get a new motor?

ed allen - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 5

Tutti i Tempi: 304