Aggiusta la tua roba Comunità Store

ResMed AirSense 10 Air Intake Filter Replacement

Attrezzature medicali
Né iFixit né questa guida di riparazione sono approvati dal produttore del dispositivo medicale o affiliati ad esso.

Introduzione

This guide will explain how to replace the air intake filter in the ResMed AirSense 10 ventilator. Regularly check the intake air filter to prevent the entry of dust and water. Replace the intake air filter every 6 months or if there are any damages or blockages to the filter.

Cosa ti serve

  1. ResMed AirSense 10 Air Intake Filter Replacement, Air Intake Filter: passo 1, immagine 1 di 2 ResMed AirSense 10 Air Intake Filter Replacement, Air Intake Filter: passo 1, immagine 2 di 2

    • The air filter cover is plastic mesh plate, on the same side as SD card holder.

    • Pry open the intake air filter cover on the bottom of the left side panel of the device.

    Modifica

  2. ResMed AirSense 10 Air Intake Filter Replacement: passo 2, immagine 1 di 2 ResMed AirSense 10 Air Intake Filter Replacement: passo 2, immagine 2 di 2

    • Remove the used air filter and inspect for damages or blockages.

    • Replace the air filter as needed.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

2 Commenti

The filter has a smooth side and a fuzzy side. Which side goes against the cover? Or doesn't it matter? Thanks.

Barbara Pollack - Replica

I’m wondering the same……

Just looked it up, fuzzy side should face outward.

Joanie K - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 6

Ultimi 7 Giorni: 40

Ultimi 30 Giorni: 252

Tutti i Tempi: 4,237