Salta al contenuto principale

Introduzione

A common type of ironing board has a lever fixed by a metal plate that is supposed to allow the legs to open and close. However, the metal plate can be damaged. When that happens, the ironing board will not be able to open and stand up. Need to iron clothes but ironing board doesn't stay up? Check out our repair guide to learn how to replace the broken metal plate of the ironing board!

  1. Replacing the Metal Plate Holding the Leg of an Ironing Board, Metal plate holding the leg of the ironing board: passo 1, immagine 1 di 1
    • Place the ironing board face down on a flat, stable surface.

  2. Replacing the Metal Plate Holding the Leg of an Ironing Board: passo 2, immagine 1 di 1
    • Unscrew and remove the broken metal plate.

  3. Replacing the Metal Plate Holding the Leg of an Ironing Board: passo 3, immagine 1 di 1
    • Cut the metal sheet into an appropriate size.

    • Use cut proof gloves for protection

  4. Replacing the Metal Plate Holding the Leg of an Ironing Board: passo 4, immagine 1 di 1
    • Using a 1/8" drill bit, drill four holes on each corner where the screws will be placed.

    • Use cut proof gloves for protection

  5. Replacing the Metal Plate Holding the Leg of an Ironing Board: passo 5, immagine 1 di 1
    • On the corner of a flat edge, use a mallet to shape the metal sheet.

    • Keep your hand at a distance from the mallet to avoid hitting your fingers.

  6. Replacing the Metal Plate Holding the Leg of an Ironing Board: passo 6, immagine 1 di 1
    • Using a screwdriver, screw on the new plate with the #10-32 x 3/8" pan-headed screws.

  7. Replacing the Metal Plate Holding the Leg of an Ironing Board: passo 7, immagine 1 di 2 Replacing the Metal Plate Holding the Leg of an Ironing Board: passo 7, immagine 2 di 2
    • Finish repairing the iron board!

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

Nina Youn

Membro da: 26/10/2018

211 Reputazione

1 Guida realizzata

Team

UC Davis, Team S2-G1, Bender Fall 2018 Membro di UC Davis, Team S2-G1, Bender Fall 2018

UCD-BENDER-F18S2G1

4 Membri

1 Guida realizzata

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 12

Ultimi 30 Giorni: 60

Tutti i Tempi: 2,017