Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

  1. Before starting, extract the SIM tray.
    • Before starting, extract the SIM tray.

  2. Torx #2 Pry in between the screen and the back cover. All electronic components are on the back of the screen.
    • Torx #2

    • Pry in between the screen and the back cover. All electronic components are on the back of the screen.

  3. Disconnect the fingerprint reader.
    • Disconnect the fingerprint reader.

  4. Remove the battery, lower PCB and screen connector bracket. Use a Philips #0 screwdriver. Screen connector
    • Remove the battery, lower PCB and screen connector bracket. Use a Philips #0 screwdriver.

    • Screen connector

  5. Connect and test the new screen before assembling it.
    • Connect and test the new screen before assembling it.

  6. Philips #0 Disconnect speaker Remove speaker
    • Philips #0

    • Disconnect speaker

    • Remove speaker

    • Apply heat on the top and bottom of the screen until it can be removed with the prying tools. Remove as much adhesive as possible and assemble the new screen.

Conclusione

Follow these instructions in reverse order to reassemble your device.

Altre 4 persone hanno completato questa guida.

Un ringraziamento speciale a questi traduttori:

100%

Questi traduttori ci stanno aiutando ad aggiustare il mondo! Vuoi partecipare?
Inizia a tradurre ›

Cesar Roman

Membro da: 03/01/2018

354 Reputazione

1 Guida realizzata

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 10

Ultimi 30 Giorni: 40

Tutti i Tempi: 3,030