Parti

Nessuna parte richiesta.

  1. Start by first removing the battery. Move the first release switch to the right position.
    • Start by first removing the battery.

    • Move the first release switch to the right position.

    • Move the second release switch to the right position while pulling the battery towards the top of the netbook.

  2. Using the bit driver and a Phillips #0 bit, remove the three circled screws, 5 mm in length.
    • Using the bit driver and a Phillips #0 bit, remove the three circled screws, 5 mm in length.

  3. Spedizione gratuita per tutti gli ordini superiori a 100,00 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio

    Mai riparato qualcosa? Questo è Genio.

    Condividi la tua storia di riparazione con #ImAGenius

    Siamo tutti Geni

    Condividi la tua storia di riparazione con #ImAGenius

  4. While holding the top of the netbook, flip the netbook over. While holding the top of the netbook, flip the netbook over.
    • While holding the top of the netbook, flip the netbook over.

  5. Carefully lift off the power bar assembly for access to the button and receiver. Carefully lift off the power bar assembly for access to the button and receiver.
    • Carefully lift off the power bar assembly for access to the button and receiver.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Mason McCaskill

Membro da: 18/10/2013

943 Reputazione

9 Guide realizzate

Team

Clemson, Team 14-2, Benson Fall 2013 Membro di Clemson, Team 14-2, Benson Fall 2013

CLEM-BENSON-F13S14G2

3 Membri

9 Guide realizzate

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 299