Salta al contenuto principale

Introduzione

Step-by-step guide to replacing your phone's logic board.

Parti

Nessuna parte specificata.

  1. Flip phone to see back cover. Using either finger or spugder tool press button located  near the top of phone by the antenna.
    • Flip phone to see back cover.

    • Using either finger or spugder tool press button located near the top of phone by the antenna.

  2. Pry up back plate from phone to reveal battery. Push button near bottom of battery using either your finger of the spudger.  This will release the battery.
    • Pry up back plate from phone to reveal battery.

    • Push button near bottom of battery using either your finger of the spudger. This will release the battery.

  3. Using a T6 Torx Screwdriver remove the four torxs on the back of the phone.
    • Using a T6 Torx Screwdriver remove the four torxs on the back of the phone.

  4. Batterie per PC portatili

    Batteries for all the top PC brands, backed by our Quality Guarantee.

    Acquista ora

    Batterie per PC portatili

    Batteries for all the top PC brands, backed by our Quality Guarantee.

    Acquista ora
  5. Simultaneously press indicated buttons on both sides of phone. Simultaneously press indicated buttons on both sides of phone.
    • Simultaneously press indicated buttons on both sides of phone.

  6. Separate back plate from the rest of phone.
    • Separate back plate from the rest of phone.

    • Make sure to not pull, there is a wire (circled on image) connecting the two plates.

  7. Gently lift logic board from back plate.
    • Gently lift logic board from back plate.

  8. Place logic board on front cover. Unsnap orange wire that connects the logic board to keypad sensor to allow the logic board to move freely.
    • Place logic board on front cover.

    • Unsnap orange wire that connects the logic board to keypad sensor to allow the logic board to move freely.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 30-40, Garner Spring 2010 Membro di Cal Poly, Team 30-40, Garner Spring 2010

CPSU-GARNER-S10S30G40

4 Membri

14 Guide realizzate

Quero comprar esse aparelho, alguém tem para vender?

Karison Mesquita - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 8

Tutti i Tempi: 1,991