Introduzione

How to replace the speaker.

Slide the battery release latch to the right.
  • Slide the battery release latch to the right.

  • Pull out the battery out towards the front of the device.

Aggiungi Commento

Remove the 7 mm Philip screws.
  • Remove the 7 mm Philip screws.

  • Remove the 10 mm Philip screws.

  • Remove the 14 mm Philip screw.

Aggiungi Commento

  • Open the flap on the left hand side.

Aggiungi Commento

  • Insert the iPod opening tools between the right and left sides of the latch.

  • Pry the right side of the latch, and then pry the left side to detach the laptop's cover.

Aggiungi Commento

  • Open the flap on the right side.

Aggiungi Commento

  • Insert the iPod opening tools towards the right side of the latch.

  • Gently pry the right side out to release the top cover.

Aggiungi Commento

  • Lift the keyboard slowly.

  • A cable connects the keyboard to the motherboard. If you are not careful, you will damage the cable.

Aggiungi Commento

  • Use your fingers or a spudger to detach the connector.

Aggiungi Commento

  • Carefully lift and remove the keyboard.

Aggiungi Commento

  • Slowly and carefully lift the speaker with your fingers.

  • The port that the speaker plugs into can be easily removed from the motherboard if not careful! Unplug the speaker with extreme caution!

Aggiungi Commento

  • Use your fingers to unplug the wires from the connector.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Derek Driscoll

Membro da: 15/04/2010

119 Reputazione

8 Guide realizzate

Team

Cal Poly, Team 26-27, Regan Spring 2010 Membro di Cal Poly, Team 26-27, Regan Spring 2010

CPSU-REGAN-S10S26G27

3 Membri

18 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,502