Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Repairing the Buttons

Introduzione

This guide will help you repair the buttons on the Seville Classics MSC10166 Tower Fan.

Cosa ti serve

  1. Repairing the Buttons, PCB (Printed Circuit Board): passo 1, immagine 1 di 1

    • Use the Phillips #2 screwdriver to remove the four 6 mm screws by unscrewing counterclockwise.

    Traduci

  2. Repairing the Buttons: passo 2, immagine 1 di 1

    • Pull the front and back cover apart.

    • Be careful not to pull the front cover off completely. It holds the wires.

    Traduci

  3. Repairing the Buttons: passo 3, immagine 1 di 1

    • Remove the Phillips 6 mm screw that holds the circuit board to the outer shell of the fan.

    • Shock warning: Make sure the fan is unplugged before removing the circuit board.

    Traduci

  5. Repairing the Buttons: passo 4, immagine 1 di 1

    • Remove the top cover containing the circuit board and the wires by pulling it away from the outer shell of the fan.

    Traduci

  6. Repairing the Buttons: passo 5, immagine 1 di 2 Repairing the Buttons: passo 5, immagine 2 di 2

    • Remove the screws from the four corners of the circuit board.

    • Remove the circuit board from the top cover.

    • Do not touch the other side of the circuit board to avoid damaging the circuit elements.

    Traduci

  7. Repairing the Buttons, Buttons: passo 6, immagine 1 di 1

    • Next remove the two (7-mm head) 8-mm screws that attach the buttons to the top cover of the fan.

    • To do this, unscrew in an upright position and pull screw out after.

    Traduci

  8. Repairing the Buttons: passo 7, immagine 1 di 1

    • Remove the buttons from the top cover.

    Traduci

  9. Repairing the Buttons: passo 8, immagine 1 di 1

    • Wipe down any dirt on the buttons.

    Traduci

  10. Repairing the Buttons: passo 9, immagine 1 di 1

    • Wipe down the frame that holds the buttons.

    • Reverse the order of this guide in order to put back together the fan.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Autore

con 11 altri collaboratori

Queena Phung

Membro da: 09/26/12

114 Reputazione

3 Guide realizzate

Distintivi: 8

+5 altri distintivi

Team

Cal Poly, Team 15-46, Forte Fall 2012 Membro di Cal Poly, Team 15-46, Forte Fall 2012

CPSU-FORTE-F12S15G46

5 Membri

6 Guide realizzate

2 Commenti

Great work but our problem is the micro switch itself, after exposing the circuit board I shorted the backside solder connections to cycle the fan on and off, everything works perfectly…..now I only need to know a part number so I can find a on/off micro switch.

any suggestions?

Thanks for any help you can provide

rickkingsbury@comcast.net

Rick - Replica

Is there a way to keep the fan in ALWAYS ON position. So I can control it’s ON/OFF using a smart plug?

Vish Talreja - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 16

Tutti i Tempi: 3,915