Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Left image shows iPhone with missing front dust mesh
-
Right image shows dust meshes on bottom
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Cut out a piece of stainless steel mesh of the tea filter using a pocket knife
-
Trim the piece of mesh using a pair of scissors to a size of approx. 3x9 mm
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Fold the piece of mesh longways using the plastic tip
-
Use a pair of tweezers to insert the folded piece of mesh into the hole above the speaker
-
Put piece of mesh into place using plastic tip
-
That's it - see the result on the images
-
Annulla: non ho completato questa guida.
Altre 28 persone hanno completato questa guida.
Un commento
This may work fine for most dirt, but with the original design there is also a cloth mesh behind the metal mesh that helps to keep finer particles out of the speaker.
This is definitely a much much much easier way to get some sort of protection in there at least. :)