Introduzione

Use this guide to repair a broken scroll wheel. Be advised, the longevity of your repaired mouse will depend on the strength of the glue or epoxy used in the repair.

Slide the tab on the bottom of the mouse to release the top panel.
  • Slide the tab on the bottom of the mouse to release the top panel.

Aggiungi Commento

Remove the top panel from the mouse.
  • Remove the top panel from the mouse.

Aggiungi Commento

  • Remove four 7mm Phillips #1 screws.

Aggiungi Commento

  • Use a spudger to pry the upper shell from the mouse at the cord entrance.

  • Move slowly. The upper case is connected to the mouse with delicate wires.

Aggiungi Commento

  • Lift the scroll wheel out of the mouse.

Aggiungi Commento

  • Wiggle the USB cord free of the mouse.

  • Resist the temptation to yank the cord free. The wires are very delicate and soldered connections are weak

Aggiungi Commento

  • Remove one 3mm Phillips #1 screw.

  • The quantity and location of screws holding the board to the mouse depends on the manufacture date of this mouse. All screws should be easy to find.

Aggiungi Commento

  • Push the broken axle piece out of the socket.

Aggiungi Commento

  • Glue broken axle piece back onto the scroll wheel.

  • This repair will last only as long as your glue or epoxy holds. The axle will re-break with weak glue and heavy use. My axle survived several heavy use days, just long enough for Monoprice to send me a new mouse.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Jeff Snyder

Membro da: 07/02/2013

2.587 Reputazione

4 Guide realizzate

Team

iFixit Membro di iFixit

Community

107 Membri

6.492 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 432