Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the 6 outer screws on the underside of the laptop.
-
Open the battery compartment and remove the 7 visible screws.
-
Pry the corners of the bezel at the base of the keyboard, pushing up until it loosens.
-
Carefully remove the ribbon connections of the keyboard, power button, and wifi button.
-
Disconnect and re-connect the white monitor ribbon located on the left side to make sure it sits firmly in the connection.
-
Reassemble the laptop by following these steps in reverse.
-
The monitor should work when powered on again.
-
-
Annulla: non ho completato questa guida.
Altre 9 persone hanno completato questa guida.