Salta al contenuto principale

Repairing Canon Powershot SD790 IS Stuck Slider Button

Cosa ti serve

  1. Repairing Canon Powershot SD790 IS Stuck Slider Button, Repairing Canon Powershot SD790 IS Stuck Slider Button: passo 1, immagine 1 di 1
    • Remove screws on strap panel of camera.

  2. Repairing Canon Powershot SD790 IS Stuck Slider Button: passo 2, immagine 1 di 1
    • After removing the two screws on your strap plate, gently pry away the back cover of your camera.

    • Now readjust the slider button so that it is in the correct position. (You will know this works, if the button will freely move once the cover is on)

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Stanley

Membro da: 01/30/11

372 Reputazione

4 Guide realizzate

Team

Cal Poly, Team 4-33, Regan Winter 2011 Membro di Cal Poly, Team 4-33, Regan Winter 2011

CPSU-REGAN-W11S4G33

4 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 14

Tutti i Tempi: 4,378