Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
This guide will instruct you on how to remove the fan blade and transformer.
Cosa ti serve
-
-
Use the Phillips #2 screwdriver to remove the four 6 mm screws by unscrewing counterclockwise.
-
-
-
-
In order to remove the fan blade pliers were used to remove the holding nut.
-
After the holding nut is loose, use the pliers to pull up to remove the nut.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.