Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Removing the HP Compaq dx2000MT Case Doors

Cosa ti serve

  1. Removing the HP Compaq dx2000MT Case Doors, Case Doors: passo 1, immagine 1 di 1
    • Turn off your computer and remove the power cable by pulling it straight out of its socket.

  2. Removing the HP Compaq dx2000MT Case Doors: passo 2, immagine 1 di 2 Removing the HP Compaq dx2000MT Case Doors: passo 2, immagine 2 di 2
    • Remove the two Phillips #2 screws that secure the case door to the device.

  3. Removing the HP Compaq dx2000MT Case Doors: passo 3, immagine 1 di 3 Removing the HP Compaq dx2000MT Case Doors: passo 3, immagine 2 di 3 Removing the HP Compaq dx2000MT Case Doors: passo 3, immagine 3 di 3
    • Remove the side case door by pushing towards the rear of the device with your hand.

    • This may take considerable force so keep pushing!

    • Once you slide the door back, remove it by pulling it outwards from the device.

  4. Removing the HP Compaq dx2000MT Case Doors: passo 4, immagine 1 di 3 Removing the HP Compaq dx2000MT Case Doors: passo 4, immagine 2 di 3 Removing the HP Compaq dx2000MT Case Doors: passo 4, immagine 3 di 3
    • Remove the side case door by pushing towards the rear of the device with your hand.

    • Once again, this may take considerable force.

    • Once you slide the door back, remove it by pulling it outwards from the device.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

Logan Pace

Membro da: 10/12/11

2.224 Reputazione

9 Guide realizzate

Team

Cal Poly, Team 17-16, Regan Fall 2011 Membro di Cal Poly, Team 17-16, Regan Fall 2011

CPSU-REGAN-F11S17G16

4 Membri

17 Guide realizzate

Un commento

Good , trying an apps

Nur Izzatie - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 8

Tutti i Tempi: 1,948