Introduzione

In this guide you will be removing the side case doors. This is a necessary step to replace every other component on the HP Compaq dx2000MT.

Turn off your computer and remove the power cable by pulling it straight out of its socket.
  • Turn off your computer and remove the power cable by pulling it straight out of its socket.

Aggiungi Commento

Remove the 2 Phillips #2 screws that secure the case door to the device.
  • Remove the 2 Phillips #2 screws that secure the case door to the device.

Aggiungi Commento

  • Remove the side case door by pushing towards the rear of the device with your hand.

    • This may take considerable force so keep pushing!

  • Once you slide the door back, remove it by pulling it outwards from the device.

Aggiungi Commento

  • Remove the side case door by pushing towards the rear of the device with your hand.

    • Once again, this may take considerable force.

  • Once you slide the door back, remove it by pulling it outwards from the device.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

Logan Pace

Membro da: 12/10/2011

2.020 Reputazione

15 Guide realizzate

Team

Cal Poly, Team 17-16, Regan Fall 2011 Membro di Cal Poly, Team 17-16, Regan Fall 2011

CPSU-REGAN-F11S17G16

4 Membri

17 Guide realizzate

Good , trying an apps

Nur Izzatie - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 5

Tutti i Tempi: 1,550