Salta al contenuto principale

Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.

Cosa ti serve

  1. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 1, immagine 1 di 3 : passo 1, immagine 2 di 3 : passo 1, immagine 3 di 3
    • Place the laptop upside down on a clean, flat surface.

    • Locate the battery release button with the padlock symbol above it.

    • Slide the battery release button towards the padlock symbol and hold it there. Note that the button is spring loaded and will return if released.

    • The battery is now released from the battery compartment.

    • Gently remove the battery from the side of the laptop.

  2. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 2, immagine 1 di 3 : passo 2, immagine 2 di 3 : passo 2, immagine 3 di 3
    • Place laptop upsid down on a clean flat work surface.

    • Remove the Philips M2.5 x 8 mm screw

    • Loosen the screw that holds the memory compartment closed

    • remove the memory module compartment cover

    • Press the Optical Drive release lever to the right and the optical drive should slide out of the case

Linea Traguardo

Richdave

Membro da: 04/09/10

32.138 Reputazione

30 Guide realizzate

Team

Master Techs Membro di Master Techs

Community

322 Membri

2.545 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 7

Ultimi 30 Giorni: 12

Tutti i Tempi: 520