Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the back two 14.0 mm Torx #10 screws.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lay the printer on its back.
-
Grab the paper tray by its right side and pull it to the left and up.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Open the frontal access panel by lifting it from the top.
-
Similar to the paper tray, grab it from the right side and pull it to the left and up.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Take out the two frontal 14.0 mm Torx #10 screws.
-
Carefully lift the frontal cover.
-