Aggiusta la tua roba Unisciti alla community Store

Removing Philips DC320 37 Bottom Panel

Introduzione

Use this guide to open the dock and install other components.

Cosa ti serve

  1. Removing Philips DC320 37 Bottom Panel, Removing Philips DC320 37 Bottom Panel: passo 1, immagine 1 di 1

    • Pry off the four white feet with the pointed end of the spudger

    Modifica

  2. Removing Philips DC320 37 Bottom Panel: passo 2, immagine 1 di 1

    • Unscrew the four 15.5 mm Phillips #2 screws that hold the bottom panel to the dock.

    Modifica

  4. Removing Philips DC320 37 Bottom Panel: passo 3, immagine 1 di 1

    • Use the flat end of the spudger to pry the lid off from the two connectors holding it to the body of the dock.

    • The connectors on the panel are fragile and may break.

    Modifica

  5. Removing Philips DC320 37 Bottom Panel: passo 4, immagine 1 di 3 Removing Philips DC320 37 Bottom Panel: passo 4, immagine 2 di 3 Removing Philips DC320 37 Bottom Panel: passo 4, immagine 3 di 3

    • Carefully pull up and out the four electrical connectors and the two ribbon connectors connecting the bottom panel and the dock.

    • Electrical Connectors

    • Ribbon Connectors

    • The cables do not have a lot of slack in them. Be careful not to break the connectors.

    • One wire is soldered onto the bottom panel. Be careful not to break this bond.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 8 altri collaboratori

Greg Lane

Membro da: 04/16/13

9 Reputazione

4 Guide realizzate

Distintivi: 6

+3 altri distintivi

Team

Cal Poly, Team 3-48, Amido Spring 2013 Membro di Cal Poly, Team 3-48, Amido Spring 2013

CPSU-AMIDO-S13S3G48

4 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 4

Tutti i Tempi: 349