Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
Only requires removing a few screws. No special tools required.
Cosa ti serve
-
-
Flip the camera so that the bottom is facing you.
-
Take a spare coin and unscrew the battery cover off.
-
-
-
-
Remove two 4.8mm screws.
-
Remove one 3.4mm screw.
-
Remove one 2.65mm screw.
-
Lift off the back cover.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 3 persone hanno completato questa guida.
Un commento
good advice, will use, have multiple Minolta cameras to work with.