Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Removing HP Compaq dx2000MT Power Supply

Cosa ti serve

  1. Removing HP Compaq dx2000MT Power Supply, Removing the HP Compaq dx2000MT Case Doors: passo 1, immagine 1 di 1
    • Turn off your computer and remove the power cable by pulling it straight out of its socket.

  2. Removing HP Compaq dx2000MT Power Supply: passo 2, immagine 1 di 2 Removing HP Compaq dx2000MT Power Supply: passo 2, immagine 2 di 2
    • Remove the two Phillips #2 screws that secure the case door to the device.

  3. Removing HP Compaq dx2000MT Power Supply: passo 3, immagine 1 di 3 Removing HP Compaq dx2000MT Power Supply: passo 3, immagine 2 di 3 Removing HP Compaq dx2000MT Power Supply: passo 3, immagine 3 di 3
    • Remove the side case door by pushing towards the rear of the device with your hand.

    • This may take considerable force so keep pushing!

    • Once you slide the door back, remove it by pulling it outwards from the device.

  4. Removing HP Compaq dx2000MT Power Supply: passo 4, immagine 1 di 3 Removing HP Compaq dx2000MT Power Supply: passo 4, immagine 2 di 3 Removing HP Compaq dx2000MT Power Supply: passo 4, immagine 3 di 3
    • Remove the side case door by pushing towards the rear of the device with your hand.

    • Once again, this may take considerable force.

    • Once you slide the door back, remove it by pulling it outwards from the device.

  5. Removing HP Compaq dx2000MT Power Supply, Power Supply: passo 5, immagine 1 di 3 Removing HP Compaq dx2000MT Power Supply, Power Supply: passo 5, immagine 2 di 3 Removing HP Compaq dx2000MT Power Supply, Power Supply: passo 5, immagine 3 di 3
    • Remove the 4 pin ATX power connector from the motherboard by pressing down the holding latch and pulling out towards the side of the device.

  6. Removing HP Compaq dx2000MT Power Supply: passo 6, immagine 1 di 2 Removing HP Compaq dx2000MT Power Supply: passo 6, immagine 2 di 2
    • Remove the 20 pin ATX power connector from the motherboard by pressing down the holding latch and pulling out towards the side of the device.

  7. Removing HP Compaq dx2000MT Power Supply: passo 7, immagine 1 di 3 Removing HP Compaq dx2000MT Power Supply: passo 7, immagine 2 di 3 Removing HP Compaq dx2000MT Power Supply: passo 7, immagine 3 di 3
    • Remove the 4 Torx T15 screws from the rear of the power supply

  8. Removing HP Compaq dx2000MT Power Supply: passo 8, immagine 1 di 2 Removing HP Compaq dx2000MT Power Supply: passo 8, immagine 2 di 2
    • Slide the power supply towards the front of the device

    • Keep your hand underneath it! You don't want to drop it!

    • Then pull the power supply down and remove it from the case.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 8 persone hanno completato questa guida.

Logan Pace

Membro da: 10/12/11

2.224 Reputazione

9 Guide realizzate

Team

Cal Poly, Team 17-16, Regan Fall 2011 Membro di Cal Poly, Team 17-16, Regan Fall 2011

CPSU-REGAN-F11S17G16

4 Membri

17 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 23

Tutti i Tempi: 3,340