Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Removing HP Compaq dx2000MT Case Fan

Cosa ti serve

  1. Removing HP Compaq dx2000MT Case Fan, Removing the HP Compaq dx2000MT Case Doors: passo 1, immagine 1 di 1
    • Turn off your computer and remove the power cable by pulling it straight out of its socket.

  2. Removing HP Compaq dx2000MT Case Fan: passo 2, immagine 1 di 2 Removing HP Compaq dx2000MT Case Fan: passo 2, immagine 2 di 2
    • Remove the two Phillips #2 screws that secure the case door to the device.

  3. Removing HP Compaq dx2000MT Case Fan: passo 3, immagine 1 di 3 Removing HP Compaq dx2000MT Case Fan: passo 3, immagine 2 di 3 Removing HP Compaq dx2000MT Case Fan: passo 3, immagine 3 di 3
    • Remove the side case door by pushing towards the rear of the device with your hand.

    • This may take considerable force so keep pushing!

    • Once you slide the door back, remove it by pulling it outwards from the device.

  4. Removing HP Compaq dx2000MT Case Fan: passo 4, immagine 1 di 3 Removing HP Compaq dx2000MT Case Fan: passo 4, immagine 2 di 3 Removing HP Compaq dx2000MT Case Fan: passo 4, immagine 3 di 3
    • Remove the side case door by pushing towards the rear of the device with your hand.

    • Once again, this may take considerable force.

    • Once you slide the door back, remove it by pulling it outwards from the device.

  5. Removing HP Compaq dx2000MT Case Fan, Case Fan: passo 5, immagine 1 di 3 Removing HP Compaq dx2000MT Case Fan, Case Fan: passo 5, immagine 2 di 3 Removing HP Compaq dx2000MT Case Fan, Case Fan: passo 5, immagine 3 di 3
    • Remove the 3 prong power connector from the motherboard by pulling it outwards toward the side of the device.

  6. Removing HP Compaq dx2000MT Case Fan: passo 6, immagine 1 di 3 Removing HP Compaq dx2000MT Case Fan: passo 6, immagine 2 di 3 Removing HP Compaq dx2000MT Case Fan: passo 6, immagine 3 di 3
    • Remove the 4 push fasteners from the case by:

    • Prying them outwards with a small flathead screwdriver and

    • Pulling them out with tweezers or plyers.

  7. Removing HP Compaq dx2000MT Case Fan: passo 7, immagine 1 di 3 Removing HP Compaq dx2000MT Case Fan: passo 7, immagine 2 di 3 Removing HP Compaq dx2000MT Case Fan: passo 7, immagine 3 di 3
    • Remove the fan from the case by pulling it towards the front of the device.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Logan Pace

Membro da: 10/12/11

2.224 Reputazione

9 Guide realizzate

Team

Cal Poly, Team 17-16, Regan Fall 2011 Membro di Cal Poly, Team 17-16, Regan Fall 2011

CPSU-REGAN-F11S17G16

4 Membri

17 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 12

Tutti i Tempi: 2,662