Introduzione

This guide will show you how to remove the case fan in your HP Compaq dx2000MT.

Turn off your computer and remove the power cable by pulling it straight out of its socket.
  • Turn off your computer and remove the power cable by pulling it straight out of its socket.

Aggiungi Commento

Remove the 2 Phillips #2 screws that secure the case door to the device.
  • Remove the 2 Phillips #2 screws that secure the case door to the device.

Aggiungi Commento

  • Remove the side case door by pushing towards the rear of the device with your hand.

    • This may take considerable force so keep pushing!

  • Once you slide the door back, remove it by pulling it outwards from the device.

Aggiungi Commento

  • Remove the side case door by pushing towards the rear of the device with your hand.

    • Once again, this may take considerable force.

  • Once you slide the door back, remove it by pulling it outwards from the device.

Aggiungi Commento

  • Remove the 3 prong power connector from the motherboard by pulling it outwards toward the side of the device.

Aggiungi Commento

  • Remove the 4 push fasteners from the case by:

    • Prying them outwards with a small flathead screwdriver and

    • Pulling them out with tweezers or plyers.

Aggiungi Commento

  • Remove the fan from the case by pulling it towards the front of the device.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Logan Pace

Membro da: 12/10/2011

2.020 Reputazione

15 Guide realizzate

Team

Cal Poly, Team 17-16, Regan Fall 2011 Membro di Cal Poly, Team 17-16, Regan Fall 2011

CPSU-REGAN-F11S17G16

4 Membri

17 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 7

Tutti i Tempi: 2,122