Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Introduzione

Remove the main fan from the case.

  1. Pull on outer latch. Lower door until it is level with your work surface.
    • Pull on outer latch.

    • Lower door until it is level with your work surface.

    • Before working on the computer make sure it is not plugged into a power supply, then touch a metal object. This discharges static electricity, which could damage the computer.

  2. Kit cacciaviti Manta

    112 punte per ogni riparazione.

    Upgrade Your Toolbox

    Kit cacciaviti Manta

    Upgrade Your Toolbox
  3. Remove the screw from each of the two niches on lower part of fan using the Phillips #1 screwdriver. The fan housing will still be connected to the computer by a power cable which will be removed in the next step.
    • Remove the screw from each of the two niches on lower part of fan using the Phillips #1 screwdriver.

    • The fan housing will still be connected to the computer by a power cable which will be removed in the next step.

  4. Remove the power cable from the fan and detach bracing.
    • Remove the power cable from the fan and detach bracing.

Linea Traguardo

Altre 2 persone hanno completato questa guida.

Justin Petrilli

Membro da: 21/01/2010

2.811 Reputazione

11 Guide realizzate

Team

Cal Poly, Team 13-24, Maness Winter 2010 Membro di Cal Poly, Team 13-24, Maness Winter 2010

CPSU-MANESS-W10S13G24

4 Membri

20 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 6

Tutti i Tempi: 4,964