Salta al contenuto principale

Introduzione

The replacement of the wheels is necessary if no profile is available, or they dissolve into their individual parts, which unfortunately occurs more often in the standard tires. The above-linked spare parts are the original wheels, which I would advise against because of the lower quality. It should fit all current 1:10 wheels.

Strumenti

Ricambi

  1. Put the 7mm nut ready (spanner or combination wrench may turn out to be unsuitable) Put the car upright
    • Put the 7mm nut ready (spanner or combination wrench may turn out to be unsuitable)

    • Put the car upright

  2. Loosen the nut (standard right-hand thread)
    • Loosen the nut (standard right-hand thread)

  3. Pull off the wheel
    • Pull off the wheel

Conclusione

reverse the steps to reassemble your device.

Un ringraziamento speciale a questi traduttori:

de en

100%

irlanda ci sta aiutando ad aggiustare il mondo! Vuoi partecipare?
Inizia a tradurre ›

Leonard Kesting

Membro da: 14/08/2016

1.194 Reputazione

9 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 24

Tutti i Tempi: 556