Introduzione

This guide will show how to reconnect the foot support to the wheelchair after it has fallen off.

Strumenti

Parti

Nessuna parte richiesta.

Slide the footrest sockets down as shown and use a 10 mm wrench to tighten the bolts at the desired height.
  • Slide the footrest sockets down as shown and use a 10 mm wrench to tighten the bolts at the desired height.

Aggiungi Commento

Screw in the bolt to the top socket to secure the height of the footrest.
  • Screw in the bolt to the top socket to secure the height of the footrest.

Aggiungi Commento

  • Screw in the bolt attaching the footrest to the frame.

  • Screw in the lower bolt to the footrest.

Aggiungi Commento

Conclusione

Check that the footrest is at the desired height. If the footrest is still uncomfortable start the guide over again from step 1 using a different height to tighten bolts.

Kali Slaughter

Membro da: 19/04/2013

207 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 14-8, Maness Spring 2013 Membro di Cal Poly, Team 14-8, Maness Spring 2013

CPSU-MANESS-S13S14G8

5 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 8

Tutti i Tempi: 445