Aggiusta la tua roba Comunità Store

Razor Hovertrax 2.0 Anti-Slip Pads Replacement

Introduzione

The anti-slip pads are built in to stop your feet from slipping off the Hovertrax board and losing control of the wheel motors.

Cosa ti serve

  1. Razor Hovertrax 2.0 Anti-Slip Pads Replacement, Anti-Slip Pads: passo 1, immagine 1 di 1

    • Choose an area to access and slip the Jimmy blade to pry open the pad.

    • We recommend prying the pad open from the top and bottom instead of the sides due to the plastic wheel cover blocking the access point.

    Modifica

  3. Razor Hovertrax 2.0 Anti-Slip Pads Replacement: passo 2, immagine 1 di 1

    • After using the Jimmy tool to open up the area, use your hands and slowly peel off the adhesive from the pad and board.

    • You may be required to remove the remaining adhesive on the board.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 23