Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Razer Naga Expert MMO Top Plastic Shell Replacement

Introduzione

This guide will help you replace the top outer casing of the mouse that holds some of the electronics for the LED lighting. Be sure to use caution when unplugging the wires, for this could result in the mouse not working properly. Also use caution when removing the plastic shell, it is fragile and it could be cracked upon removal.

Cosa ti serve

  1. Razer Naga Expert MMO Top Plastic Shell Replacement, Top Plastic Shell: passo 1, immagine 1 di 1

    • Peel back the two teflon tape from the top corners and the one larger one from the bottom with a spudger.

    Traduci

  2. Razer Naga Expert MMO Top Plastic Shell Replacement: passo 2, immagine 1 di 1

    • Remove the four 7mm screws using a Phillips head #00 screwdriver.

    Traduci

  4. Razer Naga Expert MMO Top Plastic Shell Replacement: passo 3, immagine 1 di 1

    • Gently remove the top plastic plate of the mouse.

    • Unplug the white cord from the circuit board.

    Traduci

  5. Razer Naga Expert MMO Top Plastic Shell Replacement: passo 4, immagine 1 di 1

    • Lightly pull the two plastic sides of the mouse to remove them.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

2 Commenti

do you know where i can get a new top body section? i have a molten that stopped left clicking on every click, i opened it up and the plastic pretty much was worn away

pipsqueak642 - Replica

i’m after the rubber adhesive for the side of this mouse if any one knows where to buy it from cheers.

mayo22 - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 8

Ultimi 30 Giorni: 17

Tutti i Tempi: 1,821