Aggiusta la tua roba Comunità Store

Razer Naga Epic Top Panel Disassembly

Introduzione

Instructions for how to disassemble the top assembly of the Razer Naga Epic mouse.

This is a relatively simple part of the device that houses the middle two buttons of the device as well as being responsible for bridging connections from the numpad to the mainboard.

Cosa ti serve

  1. Razer Naga Epic Top Panel Disassembly, Identify attachment points: passo 1, immagine 1 di 2 Razer Naga Epic Top Panel Disassembly, Identify attachment points: passo 1, immagine 2 di 2

    • The PCB is held to the top panel by...

    • 2 x 6mm Phillips #0 screws towards the front

    • 2 grooves on the top panel holding it in towards the rear

    Modifica

  3. Razer Naga Epic Top Panel Disassembly, Unscrew the PCB: passo 2, immagine 1 di 1

    • Unscrew the 2 screws holding the PCB into the top panel.

    Modifica

  4. Razer Naga Epic Top Panel Disassembly, Slide PCB away from the top panel: passo 3, immagine 1 di 3 Razer Naga Epic Top Panel Disassembly, Slide PCB away from the top panel: passo 3, immagine 2 di 3 Razer Naga Epic Top Panel Disassembly, Slide PCB away from the top panel: passo 3, immagine 3 di 3

    • Carefully slide the PCB horizontally away from the grooves on the rear end of the top panel.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 1 altro collaboratore

Caius Nocturne

Membro da: 07/12/21

2.066 Reputazione

13 Guide realizzate

Distintivi: 12

+9 altri distintivi

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 8

Tutti i Tempi: 41