Salta al contenuto principale

Parti

Nessuna parte specificata.

  1. Remove the teflon tape from the bottom of the mouse with a spudger.
    • Remove the teflon tape from the bottom of the mouse with a spudger.

  2. Remove the four screws with the Phillips head #00 screwdriver.
    • Remove the four screws with the Phillips head #00 screwdriver.

  3. Gently pull on the top plastic plate of the device and carefully unplug the white cord from the circuit board.
    • Gently pull on the top plastic plate of the device and carefully unplug the white cord from the circuit board.

  4. Gently pull up on the two side plastic plates.
    • Gently pull up on the two side plastic plates.

  5. Plug  the new top casing's cable back into the socket on the right side of the circuit board near the middle.
    • Plug the new top casing's cable back into the socket on the right side of the circuit board near the middle.

    • Reassemble the device.

    • Test device to make sure the connections function correctly.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 30

Tutti i Tempi: 1,044