Aggiusta la tua roba Comunità Store

Razer Blade Stealth 2017 Fan Replacement

Introduzione

This guide outlines how to replace the fans in the Razer Blade Stealth 2017. The fans keep the laptop cool and prevent the other components from overheating. A fan replacement may be necessary if the fans are damaged, not turning on, or not functioning optimally. If the fans are making abnormally loud sounds when running, they may need to be replaced. Some tools are required for this replacement.

Cosa ti serve

  1. Razer Blade Stealth 2017 Fan Replacement, Battery: passo 1, immagine 1 di 2 Razer Blade Stealth 2017 Fan Replacement, Battery: passo 1, immagine 2 di 2

    • Before you begin, be sure to turn off your laptop and discharge the battery down to 25%.

    • Use a Torx T5 screwdriver to remove the eight, 3mm screws on the bottom cover of the laptop.

    • Whenever you remove screws from the device, remember to save and label them.

    Traduci

  2. Razer Blade Stealth 2017 Fan Replacement: passo 2, immagine 1 di 1

    • Remove the bottom cover of the laptop by sliding it away from the hinge.

    • Do not force the cover up!

    Traduci

  3. Razer Blade Stealth 2017 Fan Replacement: passo 3, immagine 1 di 2 Razer Blade Stealth 2017 Fan Replacement: passo 3, immagine 2 di 2

    • Use your fingernail to pry up and disconnect the battery from the motherboard.

    Traduci

  4. Razer Blade Stealth 2017 Fan Replacement: passo 4, immagine 1 di 1

    • Use a Phillips #00 screwdriver to remove the six, 5mm screws securing the battery.

    Traduci

  6. Razer Blade Stealth 2017 Fan Replacement: passo 5, immagine 1 di 2 Razer Blade Stealth 2017 Fan Replacement: passo 5, immagine 2 di 2

    • Remove any tape attached to the battery.

    • Use the plastic spudger to pry out the battery.

    Traduci

  7. Razer Blade Stealth 2017 Fan Replacement, Fan: passo 6, immagine 1 di 2 Razer Blade Stealth 2017 Fan Replacement, Fan: passo 6, immagine 2 di 2

    • Use a plastic spudger to lift the white clasp on the fan connector.

    Traduci

  8. Razer Blade Stealth 2017 Fan Replacement: passo 7, immagine 1 di 1

    • Use tweezers to pull the fan cable out of the opened connector terminal.

    Traduci

  9. Razer Blade Stealth 2017 Fan Replacement: passo 8, immagine 1 di 3 Razer Blade Stealth 2017 Fan Replacement: passo 8, immagine 2 di 3 Razer Blade Stealth 2017 Fan Replacement: passo 8, immagine 3 di 3

    • Use tweezers to squeeze the fan's white header.

    • Disconnect the fan connector by sliding it out toward the rear of the chassis.

    Traduci

  10. Razer Blade Stealth 2017 Fan Replacement: passo 9, immagine 1 di 3 Razer Blade Stealth 2017 Fan Replacement: passo 9, immagine 2 di 3 Razer Blade Stealth 2017 Fan Replacement: passo 9, immagine 3 di 3

    • Remove any tape attached to the fans.

    • Use a Phillips #00 screwdriver to remove the six, 3mm screws and the metal bracket around both fans.

    Traduci

  11. Razer Blade Stealth 2017 Fan Replacement: passo 10, immagine 1 di 2 Razer Blade Stealth 2017 Fan Replacement: passo 10, immagine 2 di 2

    • Use a plastic spudger to slide the fans out of the case.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Autore

con 5 altri collaboratori

Helene Willits

Membro da: 10/10/19

762 Reputazione

6 Guide realizzate

Distintivi: 10

+7 altri distintivi

Team

Cal Poly, Team S11-G3, Regan Fall 2019 Membro di Cal Poly, Team S11-G3, Regan Fall 2019

CPSU-REGAN-F19S11G3

4 Membri

7 Guide realizzate

Un commento

What is the part number for the black fan? I'm trying to buy a replacement but I can't find any :(

Sang Jae Kouwenberg - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 9

Ultimi 30 Giorni: 62

Tutti i Tempi: 2,149