Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Cosa ti serve
-
-
Turn the keyboard over so that it is lying flat on its face.
-
Use the iFixit opening tool to pry the rubber feet off the keyboard.
-
-
-
-
Use a Phillips #1 screwdriver to remove the six screws on the back of the keyboard.
-
Then use the IFixIt opening tool to pry off the front panel.
-
Place the keyboard over so the keys are facing up.
-
Lift both ends of the keyboard up removing the front panel.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.